XPOWER XD-85L2 LGR Industrial Dehumidifier — Auto Pump 85/145 PPD

There is a meaningful difference between a commercial dehumidifier and a Low Grain Refrigerant dehumidifier. A standard unit pulls moisture from the air efficiently under normal conditions. An LGR unit goes further — it pre-cools incoming air before it hits the refrigerant coil, which allows it to extract moisture even when humidity levels have already dropped to ranges where a standard unit starts losing effectiveness. On a restoration job, that distinction matters because the final 20% of the drying process is where mould risk lives, and a standard unit will slow down precisely when you need it to push through. The XPOWER XD-85L2 removes 85 pints per day under AHAM conditions and up to 145 pints per day at saturation — the higher figure reflecting real-world performance in a freshly flooded space. The advanced auto-purge condensate pump automatically evacuates collected moisture through the included 40-foot drainage hose the moment the tank reaches capacity, so the unit never stops working because someone forgot to empty it overnight. The digital display keeps exhaust temperature, ambient humidity, and total operating hours visible at a glance, which matters when you are documenting a drying timeline for an insurance adjuster. The patented dual intake is a feature worth understanding if you are working in a crawl space or unheated basement in cooler months. Closing the dual intake below 68 degrees Fahrenheit optimizes the dehumidification process and reduces compressor stress — extending the life of the unit under conditions that would wear down a lesser machine. At 68.2 pounds with rugged wheels and a fold-down handle, it moves easily between floors and job sites, and up to three units can be stacked for storage or transport between deployments. What's included: The XPOWER XD-85L2 LGR dehumidifier, 40-foot drainage hose stored in the onboard compartment, and 25-foot power cord. A floor drain or suitable drainage point at the job site is required for continuous pump operation. Ducting ring for lay-flat duct attachment is included. For insurance-pay jobs, A2B provides itemized invoicing with your claim number for adjuster submission — contact us directly to arrange.